Products 12 and 24 volt

Addio Digital Relay Boxes

Within the Addio product range are four different models of Digital Relay Boxes. The main differences between the models are the power supply (12V or 24V) and the possibility to control the box with a hand controller, or wirelessly with a mobile device. The models that can be controlled by a hand controller or a mobile device are called "Advanced", or shortened "ADV". These models also have RGB LED indication for each output, built-in H-bridge for DC motor control and built-in pull-up resistors for grounded signals.

The outputs have many functions, such as:

  • Settable fuse with slow fuse option
  • Fixed or normal “relay” function
  • Many different timers from seconds to hours
  • Set/reset from different inputs
  • Blink functions with settable duty cycle millisecond range to hours
  • Individual voltage settings for each output
  • Toggle functions
  • Counters
  • Logics for sirens and blue-lights for emergency vehicles
  • Parallel or serial use of multiple functions
  • Multiple input sources
  • Temperature control from sensor
  • H-bridge for DC motor control with timers and deadtime settings
  • Energy saving mode
  • Inputs and outputs can be combined without any limitations


The models

DRB-3012-4 Standard

  • 12V Power supply
  • 4 outputs / 6 inputs
  • H-bride for DC motor controll 

DRB-9012-8 Standard

  • 12V Power supply
  • 8 outputs / 8 inputs

DRB-9012-8 Advanced

  • 12V Power supply
  • 8 outputs / 8 inputs
  • Can be controlled with hand controller
  • Can be controlled with a mobile device
  • LED indication for each output
  • H-bridge for DC motor control
  • Built in pull-ups for grounded signals

DRB-5024-8 Advanced

  • 24V Power supply
  • 8 outputs / 8 inputs
  • Can be controlled with hand controller
  • Can be controlled with a mobile device
  • LED indication for each output
  • H-bridge for DC motor control
  • Built in pull-ups for grounded signals


Technical data
 

Dimensions: DRB-3012-4 STD

Dimensions: DRB-9012-8 / DRB-5024-8

Addio Hand COntroller

For the DRB-9012-8 ADV and DRB-5024-8 ADV, a hand controller is available as an accessory which can be connected via a COM contact (RJ10).

Both controller and indicator
The hand controller has 15 RGB LED illuminated buttons, of which 13 can be linked together with the outputs on the digital relay box. Each button can be set in several different modes and can either activate an output or work as an indicator to show whether a specific output or input is active.  

All settings are saved in the relay box and not in the hand controller, which makes it possible, for example, to change the hand controller but still retain all of the current settings.

The hand controller can also be connected to multiple DRBs with a built in master slave system. You are also able to connect two hand controllers to one DRB for parallel use.

The hand controller has a built-in temperature sensor that can be used for output control.

Email us
info@addio.eu
 

Visit us
Addio Electronics AB
Humlegatan 27A
SE-722 26 Västerås
Sweden